Redundant Power Supply Blank - HP ProLiant ML110 Gen9 Maintenance And Service Manual

Remove the hot-plug power input module from the power supply bay.
10.
To replace the component, reverse the removal procedure.

Redundant power supply blank

CAUTION:
all bays are populated with either a component or a blank.
To remove the component:
Power down the server (on page 25).
1.
Access the product rear panel.
2.
WARNING:
power supply blank to cool before touching it.
Remove the power supply blank.
3.
To prevent improper cooling and thermal damage, do not operate the server unless
To reduce the risk of personal injury from hot surfaces, allow the power supply or
Removal and replacement procedures 67