Power Supply Specifications; Hot-Plug Power Supply Calculations - HP ProLiant ML110 Gen9 Maintenance And Service Manual

Specification
Minimum (one drive, power supply,
and processor installed)

Power supply specifications

Depending on the installed options and/or the regional location where the server was purchased, the server
is configured with one of the following power supplies:
•
HP ATX 350-W Power Supply (non-hot-plug) (776442-B21)
•
HP ATX 550-W Power Supply (non-hot-plug) (776444-B21)
•
HP 750-W Common Slot Gold Hot Plug Power Supply (512327-B21)
This is supported when the two-bay HP RPS Enablement option (PN 784582-B21) is installed.
These are Entry Level Power Supply products for HP ProLiant servers. For more information about the power
supply features, specifications, and compatibility, see the HP website
(http://www.hp.com/go/proliant/powersupply).
CAUTION:

Hot-plug power supply calculations

For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, see the HP Power Advisor website (http://www.hp.com/go/hppoweradvisor).
Value
12.5 kg (27.56 lbs)
Check the system and power supply input ratings before powering up the server.
Specifications 103