Removing A Redundant Hot-Plug Power Supply Or Blank; Removing A Power Supply Or Blank - HP ProLiant DL585 User Manual
Hide thumbs
Also See for ProLiant DL585:
- User manual (183 pages) ,
- Maintenance and service manual (112 pages) ,
- Quickspecs (57 pages)
Table of Contents
Advertisement
Hardware Options Installation
Removing a Redundant Hot-Plug Power Supply or Blank
To remove a redundant hot-plug power supply or blank:
1. If present, remove the Torx T-15 shipping screw from the bottom of the server
with the Torx T-15 tool that is located on the back of the server.
2. Press the release button on the locking lever upward.
3. Pull down on the locking lever.
4. Remove the power supply or blank out of the bay.
Figure 4-18: Removing a power supply or blank
4-22
HP ProLiant DL585 Server User Guide
Advertisement
Table of Contents
