Setting Pin Code - Docomo SH-03E Instruction Manual

PIN1 code/PIN2 code
(At subscription: 0000)
You can set two security codes, PIN1 code and
PIN2 code, on the docomo mini UIM card.
The PIN1 code is a four- to eight-digit security code
that is entered when a docomo mini UIM card is
inserted in the FOMA terminal or when the FOMA
terminal is turned on to prevent unauthorized use
by a third party. Making/Receiving a call and the
handset operation are enabled by entering the
PIN1 code. The PIN2 code is a four- to eight-digit
security code that is entered for performing
operations such as resetting total call charges.
If you enter the wrong PIN1 code or PIN2 code
three times continuously, it is locked.
C Setting PIN code
1
In the Normal menu,
[Lock/Security]/[UIM setting]
2
Select an item
;
[Change PIN1 code]/enter the terminal
security code/enter the current PIN1
code/enter the new PIN1 code/enter
the new PIN1 code again/C
• When PIN1 entry ON/OFF is set to [OFF],
you cannot change the PIN1 code.
;
[Change PIN2 code]/enter the terminal
security code/enter the current PIN2
code/enter the new PIN2 code/enter
the new PIN2 code again/C
;
[PIN1 entry ON/OFF]/[ON]/enter the
PIN1 code
• You can set to enter the PIN1 code when
the power is turned on.
C Disabling PIN lock
1
2
3
4
PUK is an eight-digit number used to disable the
PIN1/PIN2 code lock.
[Setting]/
In the PUK entry screen, enter PUK
(eight-digit number) while the PIN
is locked
Enter a new PIN code
Enter the new PIN code again
C
PUK (PIN Unlock Key)
You cannot change the code.
If you enter the wrong code ten times
continuously, the docomo mini UIM card is
completely locked. In this case, contact a
docomo Shop.
Various lock functions
Lock
Operation/Restriction
function
All lock Prevents all operations other than
power on/off and answering voice/
videophone calls.
Enable: In the Normal menu,
[Setting]/[Lock/Security]/[Lock
settings]/[All lock]/enter the
terminal security code
Disable: In stand-by, enter the
terminal security code
41
Basic Operation