Docomo SH-03E Instruction Manual page 130

Send/Not send setting on dial-up networks
■
Adding "186" (Send) and "184" (Not send) to the host number in dial-up networks is also possible.
Setting "186" (Send) and "184" (Not send) in both the *DGPIR command setting and the dial-up network setting
results in the following.
Dial-up network setting
(when <cid>=2)
*99***2#
184*99***2#
186*99***2#
Enter "AT*DGPIR=0" to return "186" (Send)/"184" (Not send) to [Not set] (default setting).
Set [Send] for sending caller ID when using mopera U, the DOCOMO Internet connection service.
Setting dial-up network
Set the host and TCP/IP protocol. Contact the Internet service provider or network administrator for
details on settings.
Hosts
■
For packet communication, set the host (APN) in advance. Register numbers (cid) 1 to 10 for the host (APN) in
advance, to enable using packet communication by specifying control numbers. Host (APN) settings are the
equivalent to a phonebook for packet communication on a PC. Compared to normal phonebook entries, they
appear as follows.
In phonebook
Registered number (memory number)
Other party's name
Other party's phone number
For example, when the mopera U host (APN), "mopera.net", is registered for cid1, connecting to the mopera U is
possible by specifying the host number "*99***1#". Other registered cids can be used similarly.
: Connects to host (APN) registered to cid1. Alternatively, connect with just *99#.
*99***1#
: Connects to host (APN) registered to cid2.
*99***2#
to
*99***10# : Connects to host (APN) registered to cid10.
The default setting for cid1 is "mopera.net", the APN used to connect to mopera U (<PDP_type> is "PPP"). The
default setting for cid3 is "mopera.net", the APN used to connect to mopera U (<PDP_type> is "IP"). The default
setting for cid4 is "mpr.ex-pkt.net", the APN used to connect to mopera U (<PDP_type> is "PPP"). When
connecting to a corporate LAN or Internet service providers other than mopera U, register the host (APN) using
cid2, 5 to 10 (nP. 17).
For 64K data communication, enter the access point phone number supplied by the Internet service provider or
network administrator.
Contact the Internet service provider or network administrator for more information on settings.
Access point phone number is "*8701" for mopera U when using 64K data communication.
When using packet communication, enter "*99***3#" for mopera U (default setting).
Using the *DGPIR command Send/
Not send setting
Not set (default setting)
Not send
Send
Not set (default setting)
Not send
Send
Not set (default setting)
Not send
Send
Control numbers (cids) 1 to 10
Host name (host (APN))
*99***<cid>#
19
Send/Not send caller ID
Send
Not send
Send
Not send
(dial-up network "184" is given priority)
Send
(dial-up network "186" is given priority)
In Packet communication setting