Docomo SH-03E Instruction Manual page 141

AT command
AT*DGAPL=<n> Sets host (APN) to accept
[,<cid>] transmissions for incoming packet
communications. APN settings
use <cid> parameter defined by
"+CGDCONT".
[M]
AT*DGARL=<n> Sets host (APN) to reject
[,<cid>] transmissions for incoming packet
communications. APN settings
use <cid> parameter defined by
"+CGDCONT".
[M]
AT*DRPW Displays the reception power sent
from FOMA terminal.
[M]
AT*DGPIR=<n> Setting this command is valid
when establishing
communication. Enables adding
186 (send caller ID) and 184 (not
send caller ID) to host number.
Also available in dial-up network
settings.
[M]
+++ Switches the FOMA terminal
mode from online data mode to
online command mode.
Escape guard interval is fixed at 1
second. *2
[M]
AT+CACM=[<p Resets the total accumulated cost
asswd>] recorded on the UIM.
[M]
AT+CAOC=[<m Inquires the current accumulated
ode>] cost. *2
[M]
Overview
*2
*2
*2
*2
*2
Parameter/Explanation
Adds or deletes from Accept calls list with <n>
parameter. If <cid> parameter is abbreviated,
adds (<n>=0) or deletes (<n>=1) all of <cid>
to or from list. Adds (deletes) <cid> not
defined with "+CGDCONT" to (from) list with
this command.
n=0 : Adds to list (Adds APN defined by <cid>
to Accept calls list)
n=1 : Deletes from list (Deletes APN defined
by <cid> from Accept calls list)
Adds or deletes from Reject calls list with <n>
parameter. If <cid> parameter is abbreviated,
adds (<n>=0) or deletes (<n>=1) all of <cid>
or from list. Adds (deletes) <cid> not defined
with "+CGDCONT" to (from) list with this
command.
n=0 : Adds to list (Adds APN defined by <cid>
to Reject calls list)
n=1 : Deletes from list (Deletes APN defined
by <cid> from Reject calls list)
The result from this command is in the
following format.
*DRPW:<m>
m : 0 to 75 (reception power)
n=0 : When establishing packet
communication, connects to host (APN)
directly (default setting)
n=1 : When establishing packet
communication, adds 184 and connects
to host (APN)
n=2 : When establishing packet
communication, adds 186 and connects
to host (APN)
When 186 (send caller ID)/184 (not send
caller ID) are set by this command and in the
dial-up network settings, refer to "Send/Not
send setting on dial-up networks" on P. 19.
―
Resets the total accumulated cost recorded
on the UIM, if the password matches.
<passwd>: SIM PIN2
※ Encloses this string parameter with
quotation marks (" ") when entering.
<mode>
0 : Inquires the cost of current call
The result from this command is in the
following format.
+CAOC:"<ccm>"
30
Execution
example
AT*DGAPL=0,1o
OK
AT*DGAPL?o
*DGAPL:1
OK
AT*DGARL=0,1o
OK
AT*DGARL?o
*DGARL:1
OK
AT*DRPWo
*DRPW:0
OK
AT*DGPIR=0o
OK
AT*DGPIR?o
*DGPIR:0
OK
(During
communication)
+++ (Does not
appear)
OK
AT+CACM="0123"
o
OK
AT+CAOCo
+CAOC:"00001E"
OK