Table of Contents
Advertisement
When confirming APN settings using AT
commands
: AT+CGDCONT?o
Refer to P. 31 for details on AT commands.
7
Confirm that [OK] appears and select
[ハイパーターミナルの終了] (Exit hyper
terminal) from the [ファイル] (File)
menu.
: Hyper terminal ends.
: [セッション×××を保存しますか？] (Save session
xxx?) appears. However, there is no need to save.
Setting Send/Not send caller ID
Handset number (Caller ID) is important personal information. Use caution when setting.
1
Follow steps 1 to 5 of "Setting host (APN)" on P. 16.
2
Set either Send caller ID (186) or Not
send caller ID (184) during packet
communication.
: Enter in the format: "AT*DGPIR=<n>" (nP. 30).
AT*DGPIR=1o : Add "184" when packet
AT*DGPIR=2o : Add "186" when packet
3
Confirm that [OK] appears.
communication is established
with the host (APN).
communication is established
with the host (APN).
18
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the SH-03E and is the answer not in the manual?
Questions and answers