Setup; Antenna - Whistler WS1095 Owner's Manual

CONNECTING ANTENNA

Setup

Antenna

To connect the included antenna:
1. Align the slots around the antenna's connector
with the tabs on the antenna jack.
2. Press the antenna down over the jack and turn the
antenna's base clockwise until it locks into place.
3. Mobile use requires an external antenna.
You can use a variety of antennas. To connect an
external antenna, follow the installation instructions
supplied with the antenna. Always use 50-ohm coaxial
cable, such as RG-58 or RG-8 low-loss dielectric coaxial
cable. You may also need a BNC adapter.
8