Scanning
Monitoring and Scanning
When programmed, your scanner provides two basic
functions for scanning radio transmissions:
• Monitoring – Listening to a single object.
• Scanning – Checking multiple saved objects, stopping
To scan more quickly, you can skip or lock out frequencies
that you do not wish to scan. A skipped frequency is
ignored during the current scan; a locked out frequency is
ignored for all scans unless it is unlocked.
To monitor a frequency or talkgroup:
1. From the main menu, select Browse Objects, then
press .
2. Use the direction keys to browse Scanlists and
objects.
3. Press /II/SEL to monitor the displayed
frequency.
4. Press or to select another object or press
/II/SEL to begin scanning.
To scan your active Scanlists:
1. Press Menu.
2. Select Scan from the main menu and press or
/II/SEL.
3. To pause the scan, press /II/SEL when scanner
stops on a transmission. To resume scanning,
press /II/SEL again.
To enable or disable Scanlists:
1. Select Scanlists from the main menu, and then press .
2. Press SEL to enable a Scanlist. A checkmark ( )
indicates an active Scanlist. A square ( ) indi-
cates a disabled Scanlist.
3. Press
or MENU to return to Main Menu.
To lock out objects:
1. From the main menu, select Browse Objects, then
press .
2. Use the direction keys to browse objects then
press MENU.
SCANNING
when a transmission is detected.
47