Whistler WS1095 Owner's Manual page 65

SPECIFICATIONS
SPURIOUS REJECTION
VHF High at 154.1 MHz: 40 dB
(Except Primary image)
SIGNAL TO NOISE RATIO (100 μV INPUT SIGNAL)
35-40 dB typical
SCANNING RATE WITHOUT TRUNKING
138 – 147.9 MHz: 70ch/second (in 100 kHz Intervals)
SEARCH RATE
162.25 − 167.25 MHz: 80 steps/sec.
SCAN AND SEARCH DELAY TIME
2 seconds
AUDIO MAX. POWER RF INPUT: 100 μV AT 154.1 MHZ (DEV:
3KHZ AT 1KHZ)
8 Ohms Resistor Load at speaker terminal (BTL): 2 Watts
INTERMEDIATE FREQUENCY
1st 380.8 MHz
2nd 21.4 MHz
3rd 455 kHz
ANTENNA IMPEDANCE
50 Ohms
TEMPERATURE RANGE
Operate (Need not meet spec.): -10°C − +60°C
SPEAKER
Built-in 77 mm 8 Ohms dynamic speaker
OPERATING VOLTAGE
12-14.4 VDC, 13.8 VDC nominal, 16 VDC maximum
DIMENSIONS
Approximately 1 3/4 x 7 1/8 x 5 5/16 inches
(45 x 180 x 135 mm)
WEIGHT
Approximately 33.5 oz. (950g) without accessories
PC APPLICATION SOFTWARE
Requires: Windows XP SP3 or later, Windows Vista, Windows 7
or Windows 8
65