Whistler WS1095 Owner's Manual page 21

DISPLAY ICONS
WS1095 is in Scan mode (scanning)
WS1095 is in Pause mode (monitoring a single Object)
Audio is being recorded on the active or selected
Object
Audio recording is enabled but recording is suspended.
The SD card is almost out of space. Delete or archive
F
older audio files to make room for new recordings.
Signal meter indicating strength of the received
signal
The scanner is currently receiving trunking
control channel data, or, when monitoring a
voice channel, flashes to indicate reception of
T
embedded low-speed trunking data from the
voice channel
Encrypted digital traffic detected
E
21