Ez Scan Library - Whistler WS1095 Owner's Manual

EZ Scan Library

Your scanner comes with an installed SD card that
contains the entire USA/Canadian RadioReference
database as well as the EZ Scan software. Note: Make
a copy of the EZ Scan software files in case the SD
card is lost or damaged.
To remove the SD card from the scanner:
WARNING: To prevent corrupted data on the SD Card,
always turn the scanner off using the front panel
power button.
1. Turn off scanner then unplug external power and
then remove the head unit.
2. Press and release the SD card.
3. To reinsert the SD card, with the label facing up,
into the radio, press it until it clicks in place.
NOTE: Always use the EZ Scan software "Prepare
Scanner Memory/SD Card For Use" option under the
"Scanner/ SD Card" menu to format the SD Card if the
card is not performing as expected or if the scanner
does not power up with the SD Card.
The SD card comes formatted for the standard FAT file
system with a cluster size of 32k.
To format additional cards (2GB or smaller), use only the
EZ Scan software to format the SD card.
• Format using the FAT file system with 32k clusters.
• If you use SD cards larger than 2GB, format using
FAT32 with 32k clusters.
• Formatting the SD card for other file system types
may cause EZ Scan to malfunction.
Connecting the WS1095 to a computer with the
supplied USB cable allows you to access the card with
the EZ Scan software and update the Library, edit
the configuration and stored objects, optimize the
card, and reformat the card if necessary. You can also
connect the SD Card to an external reader, which may
provide faster data transfer rates when compared to
accessing the card while it is in the radio.
EZ Scan LIBRARY
32