Same Standby Modes; Weather Priority; Skywarn - Whistler WS1095 Owner's Manual

To activate SAME Standby Mode:
1. Press
, and then press
channel.
2. Press SKIP to enter Standby Mode. The speaker
silences and SKIP = Normal appears at the
bottom of the screen.
3. To return to Normal Weather Mode, press SKIP
again.
To activate Weather Priority:
1. Press
frequencies. When scanner stops on the strongest
NOAA channel, press MENU.
2. Select Priority and press  or  to select
the channel.
3. Scroll to Save Changes and press
/II/SEL or  to save.

Skywarn™

Skywarn repeaters relay severe weather reports from
amateur radio repeaters directly to local National
Weather Service offices.
To import Skywarn Frequencies:
1. Browse for Skywarn frequencies in the EZ Scan
library and import them to the Skywarn Scanlist.
2. Enable the Skywarn Scanlist.
To activate Skywarn:
1. Press
2. Press
NOTE: Skywarn temporarily disables all other Scanlists.
SKYWARN
to begin scanning for weather
once to enter Weather Mode.
again to activate Skywarn.
56
to select a NOAA
 or 