Installing Ez Scan Software; Library Updates - Whistler WS1095 Owner's Manual

INSTALLING EZ Scan SOFTWARE

Installing EZ Scan Software
A method for programming a new scanner is using the
supplied USB cable and the included software. Also
www.RadioReference.com provides a range of resources
to help improve your overall scanning experience.
EZ Scan easy-to-use software helps you:
• Make changes to EZ Scan's programming and
configuration
• Update the Library to the most current version
• Update EZ Scan's firmware for enhancements and
bug fixes
• Format and maintain the SD card
For complete instructions on how to use the EZ Scan
Software refer to the Help Menu in the PC Application.
To install, connect the scanner to your computer's USB
port. Using windows explorer, open the SD Card to
view files, select software, then select setup.exe and
follow the on-screen instructions.
Accept all prompts when asked. User's can also insert the
SD Card into your computer via a card reader, open the
SD Card, find and open the "Software" folder and click on
"setup.exe", then follow the on-screen instructions. You
can import, configure, and update the library directly
with your scanner or with the EZ Scan software.

Library Updates

Your EZ Scan comes with the most current library data
available from www.RadioReference.com. However,
you can use the EZ Scan Software to check for updates
to the library data.
NOTE: Updating the RadioReference library requires
an internet connection.
To check for library updates:
1. Select Check for Library Update in the update
menu. Select Check for Updates to start.
2. If updates are available, click Download Updates.
3. When the update is complete, click Done.
34