Editing Objects Manually - Whistler WS1095 Owner's Manual

EDITING OBJECTS MANUALLY

Editing Objects Manually
From the main menu, select Browse Objects, browse
to an object and press Menu. Note: Not all options are
available on all objects.
Alpha Tag
Set Scanlists
RX Mode
SQ Mode
SQ Search
Store SQ Code Only appears when MENU is pressed while
SQ Exclude
Locked Out
Skipped
Priority
Delay
Attenuate
AGC
The object name. Press  or  to move
the cursor; press orto change the
value.
Changes the objects Scanlists.
Changes object's receive mode: FM, NFM
(Narrow FM), Auto, AM
Changes object's Squelch mode: None,
CTCSS, DCS, NAC, SRCH (Search)
Turns Squelch Search on or off
monitoring a conventional channel that is
set for CTCSS or DCS search mode. Select
Store SQ code to store the
value of the found CTCSS or DCS code.
Subsequent transmissions must have
matching CTCSS or DCS squelch codes to
be monitored by the WS1095.
Turns Squelch Exclude on or off. Allows
certain CTCSS/DCS codes to be excluded.
Locked objects (indicated by an
not scanned.
Skipped objects are not scanned.
EZ Scan frequently checks priority
channels for activity. Priority status is
indicated by an upper case
The scanner waits for a reply for two
seconds after a transmission ends before
resuming a scan.
Applies attenuation to the channel.
Reduces interference from strong local
transmitters. (Only available for
conventional frequencies.)
37
) are
L
.
P