Manual Programming - Whistler WS1095 Owner's Manual

MANUAL PROGRAMMING

Manual Programming - From Library
1. From the Main Menu, select Browse Library.
2. Select country.
3. Select first letter of State/Province.
4. Select State/Province.
5. Select Counties/Cites.
6. Select first letter of County.
7. Select County.
8. Select Data Type NOTE: Police/Fire and Emergency
services will be in "Categories" for smaller towns,
"Systems" for larger ones.
9. Select desired agency, category or system
available for the county.
10. Select desired subcategory. Investigate listings
by pressing
When the cursor switches from the right side of
the screen to the left, you are at the bottom of a
category. NOTE: When selecting a System, check at
least one of the "Sites" in range, then go further into
Categories to find objects.
11. Use the SEL button to check boxes for services
you wish to monitor. Press SEL to un-check a
selected service and at anytime press
back. Once all desired objects have been checked,
press MENU.
12. Select Import Selected.
13. Select desired scanlist location for selected
objects and press
14. Press SEL to continue to main menu.
15. Select Scanlists from main menu. Use the
to rename the scanlist if desired. Confirm box beside
desired scanlist is checked.
16. Repeat steps to add additional scanlists, or select
Scan from the Main Menu to begin scanning.
NOTE: When traveling or for quick programming, refer
to location based, ZIP code programming, beginning
on page 28 of the User's Guide.
to go deeper into that selection.

to save.

35
to go

// /