Display Icons - Whistler WS1095 Owner's Manual

"psDr" Indicators
In the Individual Object displays there are four
characters on the right hand side of the display that
indicate the status of priority, skip/lockout, delay
and recording for the selected or active object. The
following indicators are possible:
p=
s=
d=
r=

Display Icons

In the Individual Object displays, a row of icons at the
top of the display provides status information about the
scanner. The top row of icons are defined as follows:
S
WS1095's squelch circuit (or "gate") is open
G
When present, the attenuator is set for Global mode
A
When present, the attenuator is active
When present, Global attenuator is on, and the
GA
attenuator is active
AM
AM mode is active
FM
FM mode is active
NF
Narrow FM mode is active
DG
The radio is receiving P25 digital audio with AGC
Dg
The radio is receiving P25 digital audio without AGC
The radio is receiving P25 Phase II digital audio, with
D2
or without AGC
DISPLAY ICONS
P=
priority off,
S=
skip off,
D=
delay off,
recording off,
20
priority on
L=
skip on,
delay on
R=
recording on
lockout on