TURNING ON
Turning the WS1095 on
Press the
button on the front panel for one second to
turn the WS1095 on.
Setting Bandplan and Clock
When you first power up your WS1095 it will prompt
you to set the bandplan, date and time. Press the the
or key to select the USA or Canada bandplan,
then press /II/SEL.
-Bandplan-
-Bandplan-
USA
Canada
Press SEL to Set
Press SEL to Set
The WS1095 will then prompt you to enter the current
date and time. Press the or key to select the desired
digit, then press the key. Press the the or key to
change the value, then press /II/SEL. You can skip this
process by pressing the SKIP key. You can set the clock at
any time using the WS1095 PC application.
-Set Clock-
2010-06-03 Sat
11:00:25
Press SEL to Set
or SKIP to Exit
The Bandplan and Date/Time prompts appear only
once, on initial power-up. You can change the Date
and Time from the Main Menu and the Bandplan from
the Setting menu.
26