Gate Position Adjustment - Konica Minolta BizHub Pro 1050 User Manual

06 Gate Position Adjustment

Perform this adjustment for the folding positions in Gate folding mode processed by
the FD-501 Folding Unit.
• When adjusting Single Fold, Double Fold and Triple Fold at a time, be sure
to start with the Single Fold adjustment.
• The baseline of Single Fold is calculated from the edge of the sheet, while
that of Double Fold is calculated from the position of the first fold line, and
that of Triple Fold is calculated from the position of the second fold line,
therefore a distance (a), distance (b) and distance (c) in step 5 will be
altered by changing the position of any fold position.
Procedure
1 Touch Adjustment - 02 Finisher Adjustment - 03 Multi Folder (Fold) Adj.
2 Touch 06 Gate Position Adjustment to display the Gate Position Adjustment
Screen.
3 Touch the COPY tab to display the Copy Screen.
4 Load the desired size of paper to be adjusted on a tray, specify Gate, then press
[Start]. A sample pattern (No. 16) will be output.
2-36
03 Multi Folder (Fold) Adjustment (continued)