Adf Restart Timing Adjustment - Konica Minolta BizHub Pro 1050 User Manual

04 ADF Restart Timing Adjustment

Perform this adjustment to control the restart timing in scanning the original with
ADF.
Procedure
1 Touch Adjustment - 01 Machine Adjustment - 02 Timing Adjustment.
2 Touch 04 ADF Restart Timing Adjustment to display the ADF Restart Timing
Adjustment Screen.
3 Select the desired paper side using Next or Back. Each time Next is selected,
the display will switch as follows:
SIDE 1 - SIDE 2
Note:
"SIDE 1" refers to the right side of the paper, while "SIDE 2" refers to the
reverse side.
4 Touch the COPY tab to display the Copy Screen.
5 Select A3 paper, place the original of which a misalignment can be easily
monitored, then press [Start].
6 Check the misalignment by comparing the original and the output.
7 If there is the misalignment between the original and the output, touch the
ADJUSTMENT tab to return to the Adjustment Screen.
8 Use the touch panel keypad to enter an appropriate value, then touch Set.
Available range: -50 (fast) to +50 (slow), 1 step = 0.1 mm.
9 Repeat steps 3 to 8 until the desired result is obtained.
10 Touch Return to restore the Timing Adjustment Menu Screen.
2-16
02 Timing Adjustment (continued)