9
9.11.6 06 Gate Position Adjustment
Perform this adjustment for the folding positions in Gate folding mode proc-
essed by the FD-501 Folding Unit.
Reminder
When adjusting Single Fold, Double Fold and Triple Fold at a time, be
sure to start with the Single Fold adjustment.
The baseline of Single Fold is calculated from the edge of the sheet, while
that of Double Fold is calculated from the position of the first fold line, and
that of Triple Fold is calculated from the position of the second fold line,
therefore a distance (a), distance (b) and distance (c) in step 5 will be al-
tered by changing the position of any fold position.
9-46
Adjustment
bizhub PRO 1050P