04 Double Parallel Position Adjustment
Perform this adjustment for the folding positions in Double Parallel folding mode
processed by the FD-501 Folding Unit.
• When adjusting both Single Fold and Double Fold, be sure to start with the
Single Fold adjustment.
• The baseline of Single Fold is calculated from the edge of the sheet, while
that of Double Fold is calculated from the position of the first fold line,
therefore a distance (b) in step 5 will be altered by changing the position of
either Single Fold or Double Fold.
Procedure
1 Touch Adjustment - 02 Finisher Adjustment - 03 Multi Folder (Fold) Adj.
2 Touch 04 Double Parallel Position Adjustment to display the Double Parallel
Position Adjustment Screen.
3 Touch the COPY tab to display the Copy Screen.
4 Load the desired size of paper to be adjusted on a tray, specify Double Parallel,
then press [Start]. A sample pattern (No. 16) will be output.
2-32
03 Multi Folder (Fold) Adjustment (continued)