02 Printer Setting
Use this function to register the desired output form. Six types can be specified at
maximum.
Specify the setting number (1 to 6) first, then specify the following four printer
settings for that number.
• 01 Basic Setting specifies basic settings for printer.
• 02 PCL Setting specifies the settings concerning printer protocol.
• 03 PS Setting allows the machine to output the PS error print.
• 04 TIFF Setting specifies the settings concerning TIFF image.
Procedure
1 Touch Controller - 02 Printer Setting.
2 Specify the setting number.
(1) Use the touch screen keypad to enter the setting number for your setting.
Available range is from 1 to 6.
(2) Touch Set to complete the setting. If wrong number is entered, touch Reset to
reenter the correct number.
3-8