Samson TROVIS 5500 Mounting And Operating Instructions page 26

Operation
26
¼ Open configuration level.
The first function block is selected (marked gray).
q Select function.
Functions without function block parameters:
¼ Activate editing mode for the function.
The currently active configuration '0' or '1' is shown in-
verted on the display.
q Activate function (1) or deactivate function (0).
¼ Confirm configuration.
Functions with function block parameters:
¼ Open function.
q Select configuration.
¼ Activate editing mode for configuration.
The currently active configuration '0' or '1' is shown in-
verted on the display.
q Activate function (1) or deactivate function (0).
¼ Confirm configuration.
q Select function block parameter.
¼ Activate editing mode for function block parameter.
The current setting is shown inverted on the display.
q Set function block parameter.
Proceed in the same manner to set further function blocks.
Exit configuration level:
q Select 'Back'.
q Exit configuration level.
To adjust further function blocks in other configuration levels,
repeat steps with gray background.
Turn the rotary switch back to (operating level).
EB 5573-1 EN