Samson TROVIS 5500 Mounting And Operating Instructions page 16

Operation
16
q Select period/day for which the times-of-use are to be
valid. The times-of-use can be programmed for individu-
al days or for a block of days, e.g. Monday to Friday,
Saturday and Sunday or Monday to Sunday. The select-
ed days are shown inverted on the display.
¼ Activate editing mode for the period/day.
The start time of the first time-of-use period can now be
edited (inverted reading).
q Change start time (in steps of 15 minutes).
¼ Confirm the start time. The stop time of the first time-of-
use period can now be edited.
q End stop time (in steps of 15 minutes).
¼ Confirm the stop time. The start time of the second time-
of-use period can now be edited.
To set the second and third times-of-use periods, repeat
steps with gray background. If no further times-of-use are to
be programmed for the selected time period/day, exit the
menu by confirming the indicated start time twice (2x Û).
Proceed in the same manner to program further periods/
days.
After setting all times-of-use:
q Select 'Back'.
¼ Exit the times-of-use setting.
Turn the rotary switch back to (operating level).
EB 5573-1 EN