Samson TROVIS 5500 Mounting And Operating Instructions page 112

Operational faults
When Modbus is activated and, at the same time, the dial-up in case of error is released, the
connection with the building control station is established first, and then the text message is
sent. If the first attempt to connect to the building control station fails, the controller tries
again until the programmed number of redialing attempts has been exhausted.
In Germany, the access numbers (PA6 > P08) of the SMS service center are currently:
− D1: 0171 252 1002
− Cellnet (UK): 0044 786 098 0480 – routes to mobile networks D1, D2 and E-Plus
Add "0" to the number when dialing from a telephone extension. The mobile phone number
(PA6 > P09) must be entered as follows: 49 xxx yyyyyy, where xxx stands for 160, 171 or
any other valid dialing code and yyyyyy represents the specific mobile phone number.
Functions
Text message
Modem
Automatic configuration
Parameters*
Modem dialing pause (P)
Modem timeout (T)
Number of redialing attempts (C)
Access number
Mobile phone number
* See section 10.3
112
WE Configuration
0 CO6 > F08 - 1
0 CO6 > F03 - 1
0 CO6 > F04 - 1
WE Parameters: value range
5 min PA6 > P04: 0 to 255 min
5 min PA6 > P05: 1 to 255 min
15 PA6 > P06: 1 to 255
– PA6 > P08: Max. 22 characters; 1, 2, 3, ..., 9, 0;
– PA6 > P09: Max. 22 characters; 1, 2, 3, ..., 9, 0;
- for end of a string; P for pause
- for end of a string; P for pause
EB 5573-1 EN