SOYO SY-K7V DRAGON Plus! User Manual page 62

BIOS Setup Utility
AGP & P2P Bridge Control
Setting
AGP Aperture 64M
Size
4M, 8M,
16M, 32M,
128M,
256M.
1X
AGP Mode
2X
4X
AGP Driving Auto
Control
Manual
AGP Driving Min=0000
Value ~
Max=00FF
AGP Fast Disabled
Write
Enabled
AGP Master 1 Disabled
WS Write
Enabled
AGP Master 1 Disabled
WS Read
Enabled
AGP Post Disabled
Write
Enabled
Description
Select the size of Accelerated Graphics
Port (AGP) aperture. The aperture is a
portion of the PCI memory address
range dedicated for graphics memory
address space. Host cycles that hit the
aperture range are forwarded to the
AGP without any translation.
This item allows you to enable / disable
the AGP-4X Mode.
This item allows you to adjust the AGP
driving force. Choose Manual to key in
a AGP Driving Value in the next
selection. This field is recommended to
set in Auto for avoiding any error in
your system.
This item allows you to adjust the AGP
driving force.
The VIA chipset will use fast write to
AGP if this item is enabled. Not all
AGP cards support fast write.
When Enabled, writes to the
AGP(Accelerated Graphics Port) are
executed with one wait states.
When Enabled, read to the AGP
(Accelerated Graphics Port) are
executed with one wait states.
Enabled/Disabled AGP Post Write.
58
SY-K7V DRAGON Plus!
Note
Default
Default
Default
Default
Default
Default
Default