SOYO SY-K7V DRAGON Plus! User Manual page 118

Making a FastTrak100-Lite Disk Array Bootable
WARNING : In order for you to boot from an array on the
FastTrak100-Lite, your PC or server must be configured in the CMOS
Setup to use the FastTrak100-Lite as a bootable device (versus the
onboard controller or another add-in card).
1. Once you have returned to the Define Array Menu window, you will see
the array(s) you have created. You now may use the menu to select
which previously-defined array will be used as the bootable array.
FastBuild (tm) Utility 1.xx DELL (c) 1995-2000 Promise Technology, Inc.
Array No
* Array 1
Note: * — Bootable Array
[↑] Up [↓] Down [ESC] Exit [Enter] Select [Space] Change Boot Drive
2. Highlight the array which you want to boot from using the [↑] Up [↓] Down
keys.
3. Press the [Space] bar key.
4. An * asterisk will appear next to the array number indicating it as
bootable. The system will now recognize this array as the first array seen
5. The system will then use this bootable array as the (fixed) boot C: drive.
NOTE: The bootable array must contain your configured operating system.
DELETING AN ARRAY
The Delete Array <4> Menu option allows for deletion of disk array assignments.
[ Define Array Menu ]
RAID Mode Total Drv
Stripe
Capacity(MB)
2 13044
114
Status
Functional