Table of Contents
Advertisement
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Array No RAID Mode Total Drv
Array 2
Stripe Block: Not Available
Channel:ID
1 : Slave
11. Under [Select Drive for Rebuild], highlight the replacement drive.
12. Press [Enter] and confirm that the data will be copied on to the selected drive.
All data on the replacement drive will be written over with mirrored
information from the array drive. A progress bar will appear as below.
Please Wait While Duplicating The Image
Complete
13. Once the rebuild process is complete, the user will be asked to reboot the
system.
VIEWING CONTROLLER SETTINGS
The Controller Configuration <6> menu selection allows you to enable or disable
the FastTrak100-Lite BIOS from halting (the default) if it detects an error on boot up.
You may also view the system resources (Interrupt and I/O port address) of
FastTrak's data channels.
[ Rebuild Array Menu ]
Mirror
[ Select Drive for Rebuild ]
Drive Model
QUANTUMCR8.4A
[ Keys Available ]
[↑] Up [↓] Down
Status
2
Critical
[ESC] Exit
[Enter] Select
118
Capacity (MB)
8063
10%
Hide quick links:
Advertisement
Table of Contents
