SOYO SY-K7V DRAGON Plus! User Manual page 150

Setting Rebuild Options
Disable Hot Spare/Auto Rebuild checkbox turns off the use of a "hot" spare
drive and automatic rebuilding of a mirrored array. The default is
unchecked (or enable Hot Spare/Auto Rebuild).
Rebuild Rate assigns the amount of importance that FastTrak100-Lite
gives to mirroring data from one drive to another in the background.
A "high" setting assigns most of FastTrak100-Lite's resources to the
rebuild process at the expense of responding to ongoing read/write
data requests by the operating system. A "low" setting gives priority
to ongoing read/write data requests by the operating system at the
expense of the rebuild process and will typically result in longer
rebuild times. The setting shown above is the default.
Setting PCI Bus Utilization Option
NOTE: In most cases, a user does not need to change this setting since
FastTrak100-Lite's data handling rarely conflicts with another PCI device.
However, certain brands of video capture cards can produce a "glitch" on
play back of A/V files that may require adjusting the default setting devices
(see Tips for Audio/Video Editing for more information).
This section of the Options Window allows a user to change how much time
the FastTrak100-Lite holds on to the PCI bus to transfer data.
146