SOYO SY-K7V DRAGON Plus! User Manual page 113

FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Array No RAID Mode
Array 1
Array 2
Array 3
Array 4
Note: * — Bootable Array
[↑] Up [↓] Down [ESC] Exit [Enter] Select [Space] Change Boot Drive
1. To manually create an array from the Define Array Menu, use the arrow keys to
highlight the array number you wish to define, and press [Enter] to select.
2. The Define Array Menu will next appear that allows drive assignments to the
disk array (see next page).
Selecting Array Type
1. Under the Definition section of this menu, highlight the Array # for which you
want to assign a RAID level.
2. Use the [Space] key to cycle through three array types: Performance (RAID 0
Striping), Security (RAID 1 Mirroring).
[Define Array Menu]
Total Drv
Stripe 2
—— ——
—— ——
—— ——
[ Keys Available ]
Capacity(MB)
16126
—— ——
—— ——
—— ——
109
Status
Functional