Table of Contents
Advertisement
How to Enable 4/ 5/ 5.1 Speakers
You have to activate the "Mixer" program and enable the
"4-Speaker", "5 Speakers", or "5.1 Speakers" mode to let the
audio driver recognize your rear or center/subwoofer speakers,
and have the front/rear/center/subwoofer speakers work. The
audio driver will activate the audio chip to output different
sounds from the front/rear/center/subwoofer speakers based on
different playback formats. For more information, please refer to
the 5.1.5 Mixer Advanced-Speakers dialog.
How to Adjust the Microphone Volume
You have to use the microphone when availing yourself of the
"Echo" function. If the microphone is on and is very close to the
speakers, it will cause feedback between the two. Also, unusual
high frequencies or buzzing sounds might be heard from the
speakers.
To avoid this, you have to adjust the microphone
volume in both recording and playback. Sometimes you might
have to adjust the main and Wave volume as well. Please
left-click the mouse to adjust the microphone(MIC) in both
Volume and Recording Control.
176
Hide quick links:
Advertisement
Table of Contents
