SOYO SY-K7V DRAGON Plus! User Manual page 60

BIOS Setup Utility
DRAM Clock/Drive Control
DRAM Clock
DRAM Timing
SDRAM Cycle
Length
Bank Interleave
Precharge to
Active(Trp)
DRAM Queue
Depth
DRAM Command
Rate
Setting Description
100
This item allows you to control
133
the DRAM speed.
By SPD
By SPD If enable the DRAM will auto
detect the DRAM timing.
Manual
2.5 When synchronous DRAM is
installed, the number of clock
2
cycles of CAS latency depends
on the DRAM timing. Do not
reset this field from the default
value specified by the system
designer.
Disabled Increase DRAM performance.
2 Bank
4 Bank
2T Increase DRAM performance.
3T
2 Level Increase DRAM performance.
4 Level
3 Level
2T Command Increase DRAM performance.
1T Command
56
SY-K7V DRAGON Plus!
Note
Default
Default
Default
Default
Default
Default
Default