Creating Arrays Automatically - SOYO SY-K7V DRAGON Plus! User Manual

To create a new array automatically, follow the steps under "Creating Arrays
Automatically". SOYO recommends this option for most users.
To view drives assigned to arrays, see "Viewing Drive Assignments".
To delete an array (but not delete the data contained on the array), see "Deleting An
Array".
To rebuild a mirrored array, see "Rebuilding an Array".
To view controller settings, see "Viewing Controller Configuration".
NOTE: After configuring an array using FastBuild, you should
FDISK and format the arrayed drive(s) if you are using new, blank
drives. Depending on the type of array you are using.

CREATING ARRAYS AUTOMATICALLY

The Auto Setup <1> selection from the Main Menu can intuitively help create your
disk array. It will assign all available drives appropriate for the disk array you are
creating. After making all selections, use Ctrl-Y to Save selections. FastBuild will
automatically build the array.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Optimize Array for:
Typical Application usage:
Mode ..........................................Stripe
Spare Drive Count.............................1
Drives used in Array..........................2
Array Disk Capacity................... 16126
[↑] Up [↓] Down [←, →, Space] Change Option [ESC] Exit [Ctrl-Y] Save
[Auto Setup Options Menu]
Performance
A/V Editing
[ Auto Setup Configuration ]
[ Keys Available ]
106