SOYO SY-K7V DRAGON Plus! User Manual page 33

Hardware Installation
3. Cooling Fan Installation
(1) CPU Cooling Fan (CPUFAN1,CPUFAN2)
After you have seated the CPU properly on the processor, attach the 3-pin
fan cable to the CPUFAN connector on the Motherboard. The fan will stop
when the system enters into Suspend Mode. (Suspend mode can be enabled
from the BIOS Setup Utility, [POWER MANAGEMENT] menu.)
To avoid damage to the system, install according to the following pin
assignment:
CPUFAN Pin Assignment
CPU Cooling Fan
(CPUFAN1,CPUFAN2)
CPUFAN1
1 2
GND 12V
CPUFAN2
1 2
GND 12V
SY-K7V DRAGON Plus!
3
SENSOR
3
SENSOR
29