SOYO SY-K7V DRAGON Plus! User Manual page 128

Installing Drivers with Existing Windows 95/98
The following three sections detail the installation of FastTrak100-Lite drivers on a
system that has Windows 95/98 already installed. If you're installing the
FastTrak100-Lite drivers on a system during a Windows 95/98 installation, see
"Installing Drivers During Windows 95/98 Installation" on page 122.
1.
The "Add New Hardware Wizard" will appear, informing you that it has found
a "PCI RAID Controller."
2.
Check the "Search for the best driver for your device" box and click the Next
button.
3.
Check the "Specify a Location" box and click Next button.
4.
Type "D:\RAID\promise\Driver\Win9x-ME" in the text box. Assuming that D:
is your CD-Rom.
5.
Insert the "SOYO CD" in the CD-Rom drive.
6.
Click on "Next." The Add New Hardware wizard will say it has found
"Win95-98 FastTrak100-Lite controller".
7.
Click on "Next," and then on "Finish."
8.
Choose "Yes" when asked if you want to restart your computer.
1.
After making an array and configuring the hard drives, power up the system and
boot Windows.
2.
The "Update Device Drive Wizard" will appear, informing you that it has found
a "PCI Mass Storage Controller."
3.
Insert the "SOYO CD" in the CD-Rom drive.
4.
Type "D:\RAID\promise\Driver\Win9x-ME" in the text box, then click on
"Next." Assuming the D: is your CD-Rom. Windows will inform you that it has
found the "Win95-98 FastTrak100-Lite controller".
5.
Click on "Finish" and re-start the system.
Windows 98
Windows 95
124