Konica Minolta bizhub C25 Service Manual page 95

7. OTHER MAINTENANCE ITEM
[2] [1]
[1]
[1]
10. To reinstall, reverse the order of removal.
54
7. Disconnect all connectors and flat
8. Remove eight screws [1].
9. Remove the print control board [2].
A2YFF2C066DA
NOTE
• When the printer control board
(PRCB) has been replaced, be sure
to remount EEPROM [1] (ICS1).
Unmount EEPROM [1] (ICS1) from
the old printer control board and
mount it on the new printer control
board.
A2YFF2C067DA
NOTE
A
• When mounting EEPROM (ICS1),
make sure the notches "A" are pre-
cisely lined up.
A
A121F2C540DA
Field Service Ver. 1.1 May 2011
cables.