GE NX-10 Installation Manual page 92

LOCATION 74 - AUTHORIZING USERS 61-70 TO TRIGGER OUTPUTS 1 - 8 (10 segments, feature
selection data)
When activating outputs with a user code, location 74 can be used to restrict certain codes from
activating certain outputs. Location 74 contains 10 segments. Segment 1 corresponds to user 61,
segment 10 corresponds to user 70. Refer to location 68 chart.
Note: The zone/user for the corresponding output must be "0" to use this location.
LOCATION 75 - AUTHORIZING USERS 71 - 80 TO TRIGGER OUTPUTS 1 - 8 (10 segments, feature
selection data)
When activating outputs with a user code, location 75 can be used to restrict certain codes from
activating certain outputs. Location 75 contains 10 segments. Segment 1 corresponds to user 71,
segment 10 corresponds to user 80. Refer to location 68 chart.
Note: The zone/user for the corresponding output must be "0" to use this location.
LOCATION 76 - AUTHORIZING USERS 81 - 90 TO TRIGGER OUTPUTS 1 - 8 (10 segments, feature
selection data)
When activating outputs with a user code, location 76 can be used to restrict certain codes from
activating certain outputs. Location 76 contains 10 segments. Segment 1 corresponds to user 81,
segment 10 corresponds to user 90. Refer to location 68 chart.
Note: The zone/user for the corresponding output must be "0" to use this location.
LOCATION 77 - AUTHORIZING USERS 91 - 100 TO TRIGGER OUTPUTS 1 - 8 (10 segments,
feature selection data)
When activating outputs with a user code, location 77 can be used to restrict certain codes from
activating certain outputs. Location 77 contains 10 segments. Segment 1 corresponds to user 91,
segment 10 corresponds to user 100. Refer to location 68 chart.
Note: The zone/user for the corresponding output must be "0" to use this location.
LOCATION 78 - AUTHORIZING USERS 101 - 110 TO TRIGGER OUTPUTS 1 - 8 (10 segments,
feature selection data)
When activating outputs with a user code, location 78 can be used to restrict certain codes from
activating certain outputs. Location 78 contains 10 segments. Segment 1 corresponds to user 101,
segment 10 corresponds to user 110. Refer to location 68 chart.
Note: The zone/user for the corresponding output must be "0" to use this location.