GE NX-10 Installation Manual page 118

Location
10.6.5 Indicator-A Time Remaining
10.6.6 Indicator-B Time Remaining
10.6.7 Anti-Lock-Up Tone Time
10.7 Volumes
10.7.1 Low Gain Listen In
10.7.2 High Gain Listen In
10.7.3 Speaker
10.8 Light Control
10.8.1.1 Unit Code
10.8.1.1 House Code
10.9 Model
10.10 Version
10.11 Reset Settings
Term
station.
A menu option that sets the length of time remaining after
indicator "A" is sent to the central station. The two-way
session is terminated after this time if there is no further
activity from the central station. This time can be set
between 1 and 255 seconds.
A menu option that sets the length of time remaining after
indicator "B" is sent to the central station. The two-way
session is terminated after this time if there is no further
activity from the central station. This time can be set
between 1 and 255 seconds.
A menu option that sets the interval at which the anti-lock-
up tone is sounded at the central station.
A menu entry that groups options to adjust levels used with
the NX-534E listen-in module.
A menu option that enables the mode in which the central
station listens in to the customer's premises. This mode is
used in environments where background noise may distort
the audio.
A menu option that activates high gain listen-in mode. This is
a listen-in mode that is generally used in environments that
produce very low noise.
A menu option that sets the volume of the speaker.
A menu entry that groups X-10 device options for the
selected listen-in module.
A menu option that sets the X-10 module number used to
identify a particular X-10 device on the selected module.
A NetworX bus module number is assigned to each system
module. The system uses this number to identify the module.
It is also used to report module problems (such as tampers
and module supervision lost) to the central station.
A menu option that sets the code used to identify a particular
premises. It is necessary in case any neighbouring premises
also has an X-10 home automation system.
More information on the X-10 home automation system can
be found at www.x-10europe.com.
A menu option that displays the current model of the
selected module.
A menu option that displays the current software version of
the selected module.
A menu option that defaults the selected module to factory
defaults.
Definition