Chapter 3 Setting Up The Nx-1750; Features - GE NX-10 Installation Manual

Chapter 3
The NX-1750 ProxPad is the combination of a proximity card reader and a keypad. The NX-1750
ProxPad allows to control an access door and to show the system status. The NX-1750 ProxPad can
be added to the NetworX range of panels.

Features

•
Microprocessor controlled door control module
•
Flexible programmable changeover relay contact output, which can be used to control
a door strike.
•
Up to 8 readers per area can be connected to the NetworX range of control panel can
be programmed to control access in any or all areas.
•
LEDs for indication of armed status, ready to arm status, and alarm.
•
LEDs for up to 8 zones status indication, programmable starting zone.
•
Fire alarm LED.
•
Spare terminal to support easy wiring of a door contact to the panel zone input.
•
Tamper protection against opening and pry off.
•
Wall or recess mounting, fits a standard electrical box.
•
Removable screw terminals for easy wiring.
•
Compatible with TAG1750 series of tags
Setting up the NX-1750