Glossary - GE NX-10 Installation Manual

Task
1. Select User Menu>NX-17xx Readers>Delete One Card.
Delete one user
2. Enter the user number assigned to the card and press OK.
3. Badge a card at the reader.
4. The user card information for the entered user number will be cleared and LED1 stops
flashing. After about 40 seconds, all the readers in the system are updated with the new
user card information.
1.Select User Menu>NX-17xx Readers>Activate Card.
Activate a card
2.Enter the user number assigned to the card and press OK.
3.The user card information for the entered user number will be activated and LED1 stops
flashing. After about 40 seconds, all the readers in the system are updated with the new
user card information.
1. Select User Menu>NX-17xx Readers>Deactivate Card.
Deactivate a card
2. Enter the user number assigned to the card and press OK.
3. The user card information for the entered user number will be deactivated and LED1
stops flashing. After about 40 seconds, all the readers in the system are updated with the
new user card information.

Glossary

Location
6 NX-1701E Proximity Readers
6.1 Prox Reader 113
6.1.1 Badge Functions
6.1.1.1 Single Badge (1 Beep)
6.1.1.2 Double Badge (2 Beeps)
6.1.1.3 Badge Hold (3 Beeps)
6.1.1.1.1 Send Code Entry Function
Term
A proximity card reader/door control module that can be
programmed to control access in any or all partitions.
A menu entry that groups all options for the selected
proximity reader.
A menu entry that groups the functions activated by Single
Badge, Double Badge and Badge Hold actions.
A menu entry that groups the functions activated by
holding a proximity card once against the proximity reader.
A menu entry that groups the functions activated by
holding a proximity card against the proximity reader twice
within the time set in Badge Hold.
A menu entry that groups the functions activated by
holding a proximity card near the proximity reader for
longer than the time set in Badge Hold.
A menu option that enables the send code entry function
for the selected proximity reader action. The actions are
Single Badge, Double Badge and Badge Hold. This function
sends the same command to the control panel, using the
proximity card, as a keypad would send if a valid code
were entered. For example, if the system is armed, the
selected action disarms it.
NX-10 Expander Installation Guide
Steps
Definition
19