GE NX-10 Installation Manual page 21

Location
6.1.2.3.2 Double Badge (2 Beeps)
6.1.2.3.3 Badge Hold (3 Beeps)
6.1.3 Feature Select
6.1.3.1 User Card Programming
6.1.3.2 Optical Tamper
6.1.3.3 Buzzer Follows Keypad
6.1.3.4 Ding Dong Chime
6.1.3.5 Log RTE (Card)
6.1.3.6 Log RTE (Zone)
6.1.3.7 Card Scan Mode
6.1.4 Access Options
6.1.4.1 Maglock or Drop Bolt Lock
6.1.4.2 Allow Access While Armed
6.1.4.3 Don't Stay Unlocked While Open
6.1.4.4 Only if Open
6.1.4.5 Only if Closed
Term
A menu option that sets the X-10 function sent when a
proximity card is held against the proximity reader twice
within the time set in Badge Hold.
A menu option that sets the X-10 function sent when a
proximity card is held near the proximity reader for longer
than the time set in Badge Hold.
A menu entry that groups all optional features relating to
the selected proximity reader.
A menu option that enables user cards to be programmed.
A menu option that sends a report to the central station
when there is interference with the proximity reader. The
optical tamper is built in as a pry-off protection.
A menu option that makes the reader buzzer settings the
same as the keypad buzzer settings.
A menu option that enables a ding dong chime.
A menu option that records an RTE (Card) event in the
event log. An RTE (Card) event is a request to exit by
scanning a card.
A menu option that records an RTE (Zone) event in the
event log. An RTE (Zone) event is a request to exit by
activating a zone.
A menu option that switches between the old and new
scanning mode. The old mode is displayed as
Single/Double/Hold and the new mode is displayed as
1/2/3 Beeps.
A menu entry that groups access options for the selected
proximity reader.
A menu option that controls a maglock or drop bolt lock.
When a door zone is programmed and this option is
enabled, the proximity reader monitors the door zone and
waits for a couple of seconds after the door is closed
before activating the lock. This is to prevent a door
slamming shut due to a maglock or not getting shut at all
due to the premature locking of a drop bolt.
A menu option that enables a user to activate/deactivate
the selected proximity reader while the system is armed.
A menu option that prevents a door which has been
opened during the open period from staying open.
A menu option that activates the selected proximity reader
between opening time and closing time. During these
times, a card can be used to arm/disarm the system. A
timer is used to set these times.
A menu option that activates the selected proximity reader
after closing time and before opening time. During these
times, a card can be used to arm/disarm the system. A
timer is used to set these times.
NX-10 Expander Installation Guide
Definition
21