Pf Roller - Epson WorkForce 600 Service Manual

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW

4.5.19 PF Roller

Parts/Components need to be removed in advance
Scanner Unit/ADF Unit/Upper Housing /Hinge/Middle Cover/Printer Mechanism/
Card Slot Cover/Main Board Unit/Left Frame/Front Frame/Right Frame/CR
Motor/CR Scale/Hopper/Main Frame Assy/ASF Unit/Ink System Unit/Star Wheel
Holder Assy/EJ Roller/Front Paper Guide/PF Encoder Sensor/PF Scale
Removal procedure
When removing the PF Roller, be cautious not to touch or damage
C A U T I O N
the coated surface of the PF Roller.
1. Remove the Spur Gear 13.5 from the PF Roller with a flathead precision
screwdriver or a similar tool.
PF Roller
Spur Gear 13.5
Figure 4-108. Removing the PF Roller (1)
DISASSEMBLY/ASSEMBLY
2. Release the PF Roller from the cutout of the Base Frame (Step 2-1), and
remove the PF Roller (Step 2-2)
Step 2-1
Disassembling the Printer Mechanism
PF Roller
Figure 4-109. Removing the PF Roller (2)
Install the PF Roller after attaching the Grounding Spring as
shown in the figure below.
PF Roller
Figure 4-110. Installing the PF Roller
Revision A
Step 2-2
Grounding Spring
133
Confidential