Power Supply Unit - Epson WorkForce 600 Service Manual

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW

4.4.4 Power Supply Unit

Parts/Components need to be removed in advance
Scanner Unit/ADF Unit/Upper Housing /Hinge/ Middle Cover/Printer
Mechanism/Card Slot Cover
Removal procedure
1. Disconnect the connector of the Power Supply Unit (CN23) on the Main
Board.
2. Remove the Power Supply Unit cable from the hook of the Base Frame.
Base Frame
Figure 4-38. Removing the Power Supply Unit (1)
DISASSEMBLY/ASSEMBLY
CN23
Power Supply Unit Cable
Hook
Removing the Circuit Boards
3. Remove the screws (x2) that secure the Power Supply Unit.
4. Lift the Base Frame a little and remove the Power Supply Unit.
2
Power Supply Unit
Figure 4-39. Removing the Power Supply Unit (2)
Insert the tabs (x2) of the Power Supply Unit into the holes on
the Base Frame.
Power Supply Unit
Ribs
Figure 4-40. Installing the Power Supply Unit
Revision A
1
C.B.P. 3x10, F/Zn-3C (6±1kgfcm)
Base Frame
108
Confidential