Epson WorkForce 600 Service Manual page 141

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW
2. Remove the screws (x2) securing the ADF Rear Cover.
3. Release the hooks (x5) securing the ADF Rear Cover, and remove the ADF
Rear Cover from the ADF Base Assy.
Bottom
Figure 4-133. Removing the ADF Rear Cover
DISASSEMBLY/ASSEMBLY
ADF Rear Cover
C.B.P. 2.5x6, F/Zn-3C (6±1kgfcm)
Hook
Rib
Disassembling the ADF Unit
When installing the ADF Right Cover, align the ribs (x3)
shown in Figure. 4-132, the positioning holes as shown below,
with the dowels (x2), and hooks (x2).
ADF Right Cover
Positioning hole and dowel
Figure 4-134. Installing the ADF Right Cover
When installing the ADF Rear Cover, align the hooks (x5) and
the rib (x2) shown in Figure. 4-133
and dowels (x2) as shown below.
Positioning hole and dowel
Figure 4-135. Installing the ADF Rear Cover
Revision A
with the positioning holes
142
Confidential