Pf Roller - Epson Stylus OFFICE B30 Service Manual

EPSON Stylus C110/C120/D120/WorkForce 30/EPSON Stylus OFFICE B30/T30/T33/ME OFFICE 70

4.5.18 PF Roller

Part/Unit that should be removed before removing PF Roller
Upper Housing/Lower Housing/Main Board Unit/Left Frame/Panel Unit/Front
Frame/Right Frame/CR Motor/CR Scale/Hopper/Main Frame Assy./ASF Unit/Ink
System Unit/Star Wheel Holder Assy./EJ Roller/Front Paper Guide/PF Encoder
Sensor/PF Scale
Removing Procedure
When removing the PF Roller, Be cautious not to touch or damage
C A U T I O N
the coated surface of the PF Roller.
1. Remove the Spur Gear 13.5 from the PF Roller with a flathead precision
screwdriver or a similar tool.
PF Roller
Figure 4-85. Removing PF Roller (2)
DISASSEMBLY/ASSEMBLY
Spur Gear 13.5
Disassembling Printer Mechanism
2. Release the PF Roller from the cutout of the Base Frame (Step 2-1), and remove it
(Step 2-2).
Step 2-1
Figure 4-86. Removing PF Roller (2)
After removing/replacing the PF Roller, be sure to perform
A D J U S T M E N T
R E Q U I R E D the specified adjustment. See
(p.98)
After replacing the PF Roller, be sure to perform the required
lubrication. See
Revision C
PF Roller
Step 2-2
Chapter 5 " ADJUSTMENT"
Chapter 6 " MAINTENANCE" (p.107)
Confidential
96