Epson WorkForce 600 Service Manual page 129

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW
1. Detach the Waste Ink Tube (x2) together with the Tube Stopper from the
Waste Ink Cover.
2. Detach the Waste Ink Tube (x2) from the groove of the Base Frame.
Tube Stopper
Waste Ink Cover
Figure 4-97. Detaching Waste Ink Tube
3. Remove the screw (x1) that secures the Ink System Unit.
4. Slide the Ink System Unit in the direction of the arrow while releasing the
hook with a flathead precision screwdriver or a similar tool, and remove the
Ink System Unit.
Figure 4-98. Removing the Ink System Unit
DISASSEMBLY/ASSEMBLY
Waste Ink Tube
Groove
Ink System Unit
Hook
C.B.P. 3x6, F/Zn-3C (6±1kgfcm)
Disassembling the Printer Mechanism
If the Carriage lock lever comes off, reassemble it following the
steps below.
1. Attach the one end of the Extension Spring 0.8 to the hook
of the Carriage Lock Lever.
2. Attach the other end of the Extension Spring 0.8 to the Ink
System Unit.
3. Insert the dowel (x1) of the Carriage Lock Lever into the
hole (x1) of the Ink System Unit.
Ink System Unit
Dowel and Hole
Figure 4-99. Installing the Carriage Lock Lever
Revision A
Carriage Lock Lever
Extension Spring 0.8
130
Confidential