Epson STYLUS OFFICE TX600FW Installation Manual By Using Wireless Router And Access Point
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. Stylus Office TX600FW Series
  6. Installation manual by using wireless router and access point

Epson STYLUS OFFICE TX600FW Installation Manual By Using Wireless Router And Access Point

Hide thumbs Also See for STYLUS OFFICE TX600FW:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Basic Operation Manual, Service Manual
EPSON STYLUS OFFICE TX600FW
By using Wireless Router and Access Point

Installation Checklist:

Step 1: Confirm the computer has been connected to network. Check the SSID (Network
Name) and Passphrase (Security key and password).
Step 2: Setup the Wireless LAN on the printer panel.
Step 3: Confirm the connection status.
Step 4: Install the printer driver by Infrastructure mode
Before installation, please check the following information:
1.
SSID (network name)
2.
Type of Security Setting
Note: The printer supports WEP-64bit、WEP-128bit、WPA-PSK TKIP or WPA-PSK
AES only.
3.
Security Key and Passphrase

Hints:

a.
In order to protect your wireless network and data transmission, we recommend using a
security and encryption technologies with a particular SSID and security or Passphrase
to prevent intrusion from unknown users.
b.
For any details information about wireless router and access point, please contact
Wireless Printer Installation Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson STYLUS OFFICE TX600FW

Summary of Contents for Epson STYLUS OFFICE TX600FW

  • Page 1 EPSON STYLUS OFFICE TX600FW Wireless Printer Installation Guide By using Wireless Router and Access Point Installation Checklist: Step 1: Confirm the computer has been connected to network. Check the SSID (Network Name) and Passphrase (Security key and password). Step 2: Setup the Wireless LAN on the printer panel.

  • Page 2: Installation Procedures

    Technical Hotline of those products directly. Installation procedures: Step 1: Confirm the computer has been connected to network. Check the SSID (Network Name) and Passphrase (Security key and password). (1) Confirm network setting: SSID (Network Name) Network Security Type None WEP-64bit WEP-128bit WPA-PSK TKIP...
  • Page 3 (3) Select “Wireless LAN Setup” then press 「OK」button. (4) LCD display shows the confirmation message, select “Yes”, then press 「OK」button.
  • Page 4 (5) After enter “Wireless LAN Setup” menu, select “Enable”, then press 「OK」button. (6) Select “Manual Wireless LAN setup” , then press 「OK」button. (7) Press 「OK」button again to enter Setup page...
  • Page 5 (8) LCD display shows the Warning message, select “Yes” and then press 「OK」button. (9) Select “Infrastructure Mode” under “Communication Mode Setup” Menu, then press 「OK」button. (10) Select “SSID Input method”...
  • Page 6 10.1 Search SSID: Select the correct SSID Hints: A. If your SSID (your Network Name) cannot be shown, please check your Access Point and Wireless Router. If SSID is hidden as security issue, press「Back」button to return last step, and select “Enter SSID”...
  • Page 7 10.3 For select WEP-64bit or WEP-128bit If the character of WEP Key is 5 or 13, please select “Alphanumeric”. If the character of WEP Key is 10 or 26, please select “Hexadecimal”. 10.4 Security Setting of WEP-64 bit: Enter 64-bit WEP key, then press 「OK」button. 〞button to change character mode) (Press〝...
  • Page 8 10.5 Security Setting of WEP-128bit: Enter 128-bit WEP key, then press 「OK」button. 〞button to change character mode) (Press〝 10.6 For select WPA-PSK (TKIP) or WPA-PSK (AES) Enter WPA passphrase (8-63 characters), then press「OK」button. 〞button to change character mode) (Press〝 Hints: Please mind the “Capital Letter” and “Small Letter”, otherwise, it will affect the connection.
  • Page 9 button. If you want to print status sheet, please press 「 Start」button。 (2) If the printer is completed the network connections, the right top corner of LCD display will show the following icon. Already Connected to Wireless LAN network (Signal Strength: Excellent) Already Connected to Wireless LAN network (Signal Strength: Medium)
  • Page 10 Already Connected to Wireless LAN network (Signal Strength: Low) If no icon is displayed, no connection and connection failure Step 4: Install the printer driver by Infrastructure mode (1) Insert CD disk into CD drive. (2) Select language (3) Select “Agree” and “Next” (4) Recommend Choosing “Easy Install”...
  • Page 11 (5) Select “Network”, click on “Next” (6) Before starting the installation, please check the connection between access point and printer again. If the printer has not connected, please refer to Step 1-3. If the printer is connected, please click “Next”.
  • Page 12 (7) Recommend setting to “Allow installation of network software”. Blocking an installation may cause installation failure. (8) Select “Setup this printer for the first time”, please click “Next”.
  • Page 13 (9) Select “Method 1: Connect via a router (or access point or hubs), please click “Next”. (10) Click “Unblock the program”...
  • Page 14 (11) Select the printer from the list, please click “Next”. (12) Select “Wireless”, and click “Next”.
  • Page 15 (13) Select the correct SSID, click “Next”. If you want to enter the SSID manually, please click “Manually Enter Network Name”, then click “Next” (14) Please enter the same WEP key or WPA passphrase as used for your access point or wireless router.
  • Page 16 (For WEP Security settings) (15) Recommend using “Auto DHCP”, click “Next”.
  • Page 17 (16) Select the memory card accessed method, click “Next”. (17) Please confirm network setting, and then click “Next”.
  • Page 18 (18) Suggest keeping the printer name, click “Next”. (19) If click “Yes”, Test Page will be printed.
  • Page 19 (20) If the page is printed successfully, the installation is completed.

Table of Contents