Star Wheel Holder Assy - Epson WorkForce 600 Service Manual

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW
When installing the Front Frame, pay attention to the
following instructions.
• As shown in Figure.
with the hook (x1) and the cutouts (x2).
• As shown in Figure. 4-61
Frame together with the screw. (Place the Right Frame on top
of the Front Frame.)
Secure the Head FFCs (x3) to the Front Frame with the acetate
tape (x1) as shown in the figure below.
Align the edge of the Front
Frame with the bending
point of the Head FFC, and
secure the FFC with the
acetate tape.
Figure 4-64. Acetate tape position
DISASSEMBLY/ASSEMBLY
4-62, be sure to secure the Front Frame
secure the Front Frame and Right
Acetate tape (40mm)
Bending point of Head FFC
Disassembling the Printer Mechanism

4.5.7 Star Wheel Holder Assy

Parts/Components need to be removed in advance
Scanner Unit/ADF Unit/Upper Housing /Hinge/Middle Cover
Removal procedure
1. Remove the Grounding Spring from the Star Wheel Holder Assy.
2. Remove the screws (x2) that secure the Star Wheel Holder Assy, and remove
the Star Wheel Holder Assy.
Figure 4-65. Removing the Star Wheel Holder Assy
Revision A
Star Wheel Holder Assy
Grounding Spring
C.B.P. 3x8, F/Zn-3C (6±1kgfcm)
Confidential
118