Removing The Printer Mechanism/Card Slot Cover - Epson WorkForce 600 Service Manual

EPSON WorkForce 600/EPSON Stylus OFFICE TX600FW/BX600FW/EPSON Stylus SX600FW/ME OFFICE 700FW

4.5.4 Removing the Printer Mechanism/Card Slot Cover

Parts/Components need to be removed in advance
Scanner Unit/ADF Unit/Upper Housing /Hinge/Middle Cover
Removal procedure
1. Remove the screw (x1) securing the Card Slot Cover.
2. Release the hooks (x2) securing the Card Slot Cover, and remove the Card
Slot Cover.
Top
C.B.P. 3x10, F/Zn-3C (6±1kgfcm)
Card Slot Cover
Figure 4-54. Removing the Card Slot Cover
DISASSEMBLY/ASSEMBLY
3. Release the hook that secures the Rear Cover with tweezers, and remove the
Rear Cover.
C A U T I O N
Hook
Disassembling the Printer Mechanism
Hook
Rear Cover
Figure 4-55. Removing the Rear Cover
When lifting the Printer Mechanism, be sure to hold the positions
specified in the figure below to prevent the Main Frame from being
deformed.
Handling Precaution
Figure 4-56. Printer Mechanism Handling Precaution
Revision A
114
Confidential